sert lehimleme

listen to the pronunciation of sert lehimleme
Турецкий язык - Английский Язык
brazing
A method of joining metals by using heat and a filler
present participle of braze
Brazing is the joining of metal parts by melting a different metal (of lower melting point) which bonds the parts together Typically brazing involves joining steel parts with molten brass Soldering is a similar operation, using lower temperatures and different filler metals (with a lower melting point) In brazing and soldering, the filler metal penetrates inaccessible areas of the joint by capillary action See also welding, fillet brazing
a method of steel frame construction that involves brass or silver solder to connect frame tubes
The joining of metal parts by heating them and, by capillary action, drawing a molten copper-zinc or other brazing alloy between them
Brazing and soldering are techniques for joining metals in the solid state by means of a fusible filler metal with a melting point well below that of the base metal
a metal joining technique that uses a molten filler metal alloy having a melting temperature greater than about 425 degrees C (800 F)
Method of joining metals with nonferrous filler (without iron) using heat between 800 deg F and melting point of base metals
A group of welding processes in which a groove, fillet, lap, or flange joint is bonded by using a nonferrous filler metal having a melting point above 800 °F (427 °C), but below that of the base metals Filler metal is distributed in the joint by capillary attraction
a metal joining technique that uses a molten filler metal alloy having a melting temperature greater than about 425 ° C
Joining metals by flowing a thin layer of molten, nonferrous filler metal into the space between them
The joining of ends of two wires, rods or groups of wires with a non-ferrous filler metal at temperatures above 800°F (427°C)
{i} soldering using a hard solder
Joining metals by flowing a thin-layer capillary thickness of nonferrous filler metal into the space between them
Brazing is a method of joining metal parts together by fusing a layer of brass between the adjoining surfaces A red heat is necessary and a flux is used to protect the metal from oxidation
A form of welding that secures a carbide cutting edge to the steel body of a router cutter
Process for joining two pieces of metal by applying heat and adding a filler metal. The filler, which has a lower melting point than the metals to be joined, is either pre-placed or fed into the joint as the parts are heated. In brazing parts with small clearances, the filler is able to flow into the joint by capillarity. The temperature of the molten filler in brazing exceeds 800°F (430°C). In soldering, a related process, the filler metal remains below that temperature. Brazed joints are usually stronger than soldered joints. Most metals can be brazed, and the range of available brazing alloys has increased as new alloys and new service requirements are introduced. Brazed joints are highly reliable and are used extensively on rockets, jet engines, and aircraft parts. See also welding
Method of joining metals with nonferrous filler (without iron) using heat between 800 F (427 C ) and melting point of base metals
sert lehimleme
Избранное
Еще...
Очистить