lambalı geçme (kapı)

listen to the pronunciation of lambalı geçme (kapı)
Турецкий язык - Английский Язык
{i} rabbet
A longitudinal channel, groove, or recess cut out of the edge or face of a plank of wood or other material; especially, one intended to fit another member to form a joint
a rectangular groove made to hold two pieces together
The section of the door frame recessed to receive the door
The recess or offset formed in the door frame to receive the door
cut a rectangualr groove into
{i} groove or notch in a timber into which another timber is inserted (for joining timbers without using nails or screws)
  Rectangular cut of two surfaces
A rectangular longitudinal groove cut in the corner edge of a board or plank
The ledge in a piece of frame molding where the glass, mats, and print or mirror sits It is usually a 1/4 inch wide
Same as Rabbet joint, below
Any rectangular piece of lumber with a rectangular longitudinal ell cutout at one of its edges to make a rabbeted, lapped joint Also referred to as shiplap lumber
A cut partway through the edge of a board that is used as a part of a joint
Rectangular cut of two surfaces
A groove cut in a board to receive another board
A groove or cut made in a piece of timber in such a way that the edges of another piece could be fit into it to make a tight joint
a rectangular groove made to hold two pieces together cut a rectangualr groove into join with a rabbet joint
To cut a rabbet in; to furnish with a rabbet
A longitudinal channel, groove, or recess cut out of the edge or face of any body; especially, one intended to receive another member, so as to break or cover the joint, or more easily to hold the members in place; thus, the groove cut for a panel, for a pane of glass, or for a door, is a rabbet, or rebate
A channel, groove, or recess cut into the edge or face of a surface, intended to receive another member
lambalı geçme (kapı)
Избранное
Еще...
Очистить