brazing

listen to the pronunciation of brazing
Английский Язык - Турецкий язык
{f} pirinç ile lehimle: prep.lehimle
pirinç kaynak
sert lehimleme
{f} pirinç ile lehimle
(Mühendislik) sert lehim, pirinç kaynağı
PiRiNc KAYNAgI
(Nükleer Bilimler) lehimleme
erime noktası
sarı kaynağı

Связанные Термины

brazing alloy
sert lehim alaşımı
braze
lehimlemek
dip brazing
daldırmalı sert lehimleme
braze
pirinçle lehimlemek
braze
sert lehim
dip brazing
daldırmalı lehimleme
electric brazing
elektrik lehimi
braze
lehimle
furnace brazing
ocakta sert lehimleme
torch brazing
şalümo lehimi, üfleçle lehimleme
braze
(fiil) pirinçle lehimlemek
braze
pirince benzer hale getirmek
braze
pirinç veya çelikle kaynak yapmak
braze
(Nükleer Bilimler) lehimleme
buttress brazing struts
bağlantı kirişleri
copper brazing
(Havacılık) bakır kaynağı
induction brazing
(Havacılık) endüksiyon kaynağı
torch brazing
şalümo lehimi
torch brazing
üfleçle lehimleme
Английский Язык - Английский Язык
A method of joining metals by using heat and a filler
Present participle of braze
Brazing is the joining of metal parts by melting a different metal (of lower melting point) which bonds the parts together Typically brazing involves joining steel parts with molten brass Soldering is a similar operation, using lower temperatures and different filler metals (with a lower melting point) In brazing and soldering, the filler metal penetrates inaccessible areas of the joint by capillary action See also welding, fillet brazing
a method of steel frame construction that involves brass or silver solder to connect frame tubes
The joining of metal parts by heating them and, by capillary action, drawing a molten copper-zinc or other brazing alloy between them
Brazing and soldering are techniques for joining metals in the solid state by means of a fusible filler metal with a melting point well below that of the base metal
a metal joining technique that uses a molten filler metal alloy having a melting temperature greater than about 425 degrees C (800 F)
Method of joining metals with nonferrous filler (without iron) using heat between 800 deg F and melting point of base metals
A group of welding processes in which a groove, fillet, lap, or flange joint is bonded by using a nonferrous filler metal having a melting point above 800 °F (427 °C), but below that of the base metals Filler metal is distributed in the joint by capillary attraction
a metal joining technique that uses a molten filler metal alloy having a melting temperature greater than about 425 ° C
Joining metals by flowing a thin layer of molten, nonferrous filler metal into the space between them
The joining of ends of two wires, rods or groups of wires with a non-ferrous filler metal at temperatures above 800°F (427°C)
{i} soldering using a hard solder
Joining metals by flowing a thin-layer capillary thickness of nonferrous filler metal into the space between them
Brazing is a method of joining metal parts together by fusing a layer of brass between the adjoining surfaces A red heat is necessary and a flux is used to protect the metal from oxidation
A form of welding that secures a carbide cutting edge to the steel body of a router cutter
Process for joining two pieces of metal by applying heat and adding a filler metal. The filler, which has a lower melting point than the metals to be joined, is either pre-placed or fed into the joint as the parts are heated. In brazing parts with small clearances, the filler is able to flow into the joint by capillarity. The temperature of the molten filler in brazing exceeds 800°F (430°C). In soldering, a related process, the filler metal remains below that temperature. Brazed joints are usually stronger than soldered joints. Most metals can be brazed, and the range of available brazing alloys has increased as new alloys and new service requirements are introduced. Brazed joints are highly reliable and are used extensively on rockets, jet engines, and aircraft parts. See also welding
Method of joining metals with nonferrous filler (without iron) using heat between 800 F (427 C ) and melting point of base metals
a method of joining metal parts together by fusing a layer of brass between the adjoining surfaces A red heat (700-800°C) is necessary and a flux used to protect the metal from oxidation
A process where metals are joined using a filler metal that melts at a temperature above 450 degrees celcius
a process of joining metals using a non-ferrous filler metal having a melting point that is lower than the "parent metals" to be joined, typically over +800ºF

Связанные Термины

braze
The joining together of two metal pieces, without melting them, using heat and diffusion of a jointing alloy of capillary thickness
braze
to make of or ornament with brass
braze
{v} to cover or solder with brass
braze
High-temperature soldering using a bronze filler rod which has a higher (840 degrees F) melting point than normal soldering and makes touch, durable joints
braze
To cover or ornament with brass
braze
{f} coat with brass; solder
braze
To burn or temper in fire
braze
with an alloy of copper and zinc; as, to braze the seams of a copper pipe
braze
To solder with hard solder, esp
braze
To solder with a relatively infusible alloy
braze
To solder with brass, an alloy made of copper and zinc
braze
solder together by using hard solder with a high melting point
braze
\Braze\, v 1: To solder 2: to harden
braze
To harden
brazing
Избранное
Еще...
Очистить