(Askeri) ÖRS: Bir kapsül içinde bulunan sert madeni kısım. Ateşleme iğnesinin kapsül üzerine çarpmasıyla infilak maddesi, örs üzerinde sıkışıp ateş alır
Английский Язык - Английский Язык
Определение anvilled в Английский Язык Английский Язык словарь
Anvil is the common name given tothe small incus bone, which is the second of the three bones (ossicles) that work in series in the middle ear to transmit sound to the inner ear Also see under H (Hammer, Anvil and Stirrup)
Usually a heavy supporting surface over which metal is hammered Anvils have a traditional form composed of a squarish base, flat face, and tapered horn Anvils are made of an iron body and hardened steel face They are also being cast in one piece of steel that is then heat treated
An iron or steel block used as a table on which metals are worked or forged Where an iron block is used the working face is generally made of steel It is usual to provide a hole about 11/4in square for holding working tools such as hardies, fuller blocks, etc Anvils are used in a shipyard by blacksmiths, angle smiths and flange turners
The spreading of the upper portion of a cumulonimbus cloud into an anvil-shaped plume usually of fibrous or smooth appearance Strong or severe thunderstorms often have thicker anvils with the side and bottom having a cumuliform or slowly boiling appearance in the immediate vicinity of the parent cumulonimbus
* A metallic point against which the explosive compound of a primer is driven into by the firing pin, striker,or hammer of a firearm to produce a detonation to egnite the gunpowder
The upper portion of a cumulonimbus cloud that becomes flat and spread-out, sometimes for hundreds of miles downstream from the parent cloud It may look smooth or fibrous, but in shape, it resembles a blacksmith's anvil It indicates the mature or decaying stage of a thunderstorm
A portion of the primer pocket or primer which provides resistance to the crushing action of the firing pin which causes the printing mixture to detonate
The mandrel passes through the anvil The anvil "holds" the insert, giving the mandrel something to pull against in order to set (collapse) the rivet nut
The flat, spreading top of a Cb (cumulonimbus), often shaped like an anvil Thunderstorm anvils may spread hundreds of miles downwind from the thunderstorm itself, and sometimes may spread upwind (back-sheared anvil)
The flat, spreading top of a Cumulonimbus Cloud (Cb) Thunderstorm anvils may spread hundreds of miles downwind from the thunderstorm itself, and sometimes may spread upwind
An anvil is a heavy iron block on which hot metals are beaten into shape. a heavy iron block on which pieces of hot metal are shaped using a hammer. Iron block on which metal is placed for shaping, originally by hand with a hammer. The blacksmith's anvil is usually of wrought iron (sometimes of cast iron), with a smooth working surface of hardened steel. A projecting conical beak, or horn, at one end is used for hammering curved pieces of metal. When power hammers are used, the anvil is supported on a heavy block, which in turn rests on a strong foundation of timber and masonry or concrete. See also smithing