genişletme vida

listen to the pronunciation of genişletme vida
Türkçe - İngilizce
countersink
to create such a conical recess
The chamfered end of a hole that receives a flat head screw
To cut a tapered recess which allows the head of a screw to lie flush with a surface or The tapered recess itself
To drive a nail or screw below the surface
for the reception of the head of a screw or bolt below the surface, either wholly or in part; as, to countersink a hole for a screw
The larger diameter at the entrance of a machined hole with a conical bottom Similar to a counterbore except for the bottom configuration The general use of a countersink if for use with flat head screws and bolts
a hole (usually in wood) with the top part enlarged so that a screw or bolt will fit into it and lie below the surface
A drill or cutting tool for countersinking holes
a conical recess, typically machined around a hole to admit a screw so that it sits flush with a surface
To chamfer or form a depression around the top of a hole in wood, metal, etc
a bit for enlarging the upper part of a hole
A device to counterbore a hole for the head of a flat head screw
To cause to sink even with or below the surface; as, to countersink a screw or bolt into woodwork
insert (a nail or screw below the surface, as into a countersink)
{f} make (the head of a bolt, nail, etc.) flush or level with a surface
An enlargement of the upper part of a hole, forming a cavity or depression for receiving the head of a screw or bolt
genişletme vida