parlatma, polisaj

listen to the pronunciation of parlatma, polisaj
Turkish - English
(Mühendislik) polishing
That makes shiny or smooth
That refines
{n} the act of giving a polish
(As it pertains to sanitary stainless steel piping): The process of resolving the roughness of the outside and/or the inside wall of stainless steel pipe by one of two methods
from Polish
Abrasive process in which the surface created takes on a bright reflective finish, scratch-free to the unaided eye
Smoothing a metal surface, usually by rubbing with fine abrasives A mechanical finishing operation for the purpose of producing a gloss or luster on the surface of a product
Smoothing the surface of an object when it is cold by holding it against a rotating wheel fed with a fine abrasive Glass can also be polished with hand-held tools
present participle of polish
cleaning dishes to remove food before washing to help keep the dish water clean
{i} buffing, shining, brushing; improving, refining
The application of a temporary coating that protects the floor from wear, abrasion, soiling and discoloration, while smoothing the surface and significantly improving gloss Polishes are easily removed and replaced or refurbished
In contrast to grinding with its cutting effect, in polishing there theoretically is no material removal at all, but unevenness, grooves and scratches are leveled and widely covered The polishing process can be imagined that way, that the metal surface becomes slightly plastic due to the pressure of the polishing equipment and the substantial heat resulting from that This crystalline film similar to a viscous substance slides into the scratches, grooves and small uneven areas of the metal surface during the polishing process Due to the effect of the surface forces, a displacement of the metal surface in the finest layer in the mechanical polishing process takes place for that long, until an extensive planarization is achieved
The action of rubbing a painted finish to a very high gloss (or shiny) finish This is a term that can replace buffing or compounding but it should be used as the FINAL step and compounding is actually the first step after color sanding and after compounding we polish
A method to smooth the surface of the crystal, by machine or hand The higher the polish, the greater the brilliance of the crystal
Smoothing the surface of an object when it is cold by holding it against a rotating wheel fed with a fine abrasive
Excessive smoothing of the surface finish of the cylinder bore or cylinder liner in an engine to a mirror-like appearance, resulting in depreciation of ring sealing and oil consumption performance
operation carried out on high gloss top coats (mainly PU) or wax PE in order to get rid of dust particles incorporated in the film and to build up the gloss It consists of 2 main stages: - fine sanding of the coating, using several paper of increasing fineness of grit such as 600 - 800 - 1000, - polishing of the surface by means of fine abrasive waxes, applied and rubbed by special brush rollers
Smoothing and brightening surfaces such as metal or rocks through the use of abrasive materials and/or chemi-mechanical action Colloidal silicas are used for polishing semiconductor silicon wafers Also used, particularly with water, to mean a final purifying step
parlatma, polisaj
Favorites
More...
Clear