That means the removal of carbon containing boring oil, lubricating oil and/or grease residues from the surface in a degreasing plant, to avoid carbonizing of the seamless tubes in subsequent annealing In case oil and grease residues are not removed completely, carbonizing will occur during annealing and thus decrease the corrosion resistance of the finished tube
The removal from the substrate of contaminants which would otherwise give rise to surface defects and performance failures E g poor adhesion
Process for removal of grease, oil, etc from metal surfaces in preparation for electroplating Typically, the metal is immersed in hot, strongly basic solution or in organic solvents to remove and dissolve these coatings See also electrolytic degreasing
Removing dirt and oils from the stretched screen before applying the stencil to insure adhesion to the screen surface
To remove melted fat from the surface of liquid, usually by skimming with a spoon, refrigerating to solidify the fat, or by using a cup or pitcher designed to separate the fat from the liquid