to rabbet

listen to the pronunciation of to rabbet
Englisch - Türkisch
lambalı geçme yapmak
(Arılık) kanal
(Mimarlık,Teknik) lamba
fatura
lambalı geçme yapmak
zıvana
{i} oluk
yivli tahtalarla birbirine bindirilen yer
yivli tahtalan birbirine bindirmek
rabbet plane oluk rendesi
{f} oluk açmak
{i} yiv
{i} lambalı geçme
{i} lambalı geçme (kapı)
{f} birbirine geçirmek
aşoz
Englisch - Englisch
A longitudinal channel, groove, or recess cut out of the edge or face of a plank of wood or other material; especially, one intended to fit another member to form a joint
To cut a [[#Noun|rabbet]] in a piece of material
a rectangular groove made to hold two pieces together
The section of the door frame recessed to receive the door
The recess or offset formed in the door frame to receive the door
cut a rectangualr groove into
{i} groove or notch in a timber into which another timber is inserted (for joining timbers without using nails or screws)
  Rectangular cut of two surfaces
A rectangular longitudinal groove cut in the corner edge of a board or plank
The ledge in a piece of frame molding where the glass, mats, and print or mirror sits It is usually a 1/4 inch wide
Same as Rabbet joint, below
Any rectangular piece of lumber with a rectangular longitudinal ell cutout at one of its edges to make a rabbeted, lapped joint Also referred to as shiplap lumber
A cut partway through the edge of a board that is used as a part of a joint
Rectangular cut of two surfaces
A groove cut in a board to receive another board
A groove or cut made in a piece of timber in such a way that the edges of another piece could be fit into it to make a tight joint
a rectangular groove made to hold two pieces together cut a rectangualr groove into join with a rabbet joint
To cut a rabbet in; to furnish with a rabbet
A longitudinal channel, groove, or recess cut out of the edge or face of any body; especially, one intended to receive another member, so as to break or cover the joint, or more easily to hold the members in place; thus, the groove cut for a panel, for a pane of glass, or for a door, is a rabbet, or rebate
A channel, groove, or recess cut into the edge or face of a surface, intended to receive another member
1) Rectangular slot or groove in joinery 2) A recess in the meeting stiles of cabinet doors so that when one shuts against the other it forms a dustproof joint
The recess or offset formed in the frame to receive door
A two-sided L-shaped recess in sash or frame to receive lites or panels
To unite the edges of, as boards, etc
Or rebate; a groove incised along a timber to receive the edge of a plank or strake The most common rabbets are the keel rabbet which receives the garboard, and the rabbet of the stem and stern post which receives the strake ends
A "L" shaped groove cut into the side of a wood component
join with a rabbet joint
A square groove cut along the edge of a plank
A rectangular shape consisting of two surfaces cut along the edge or end of a board
an L-shaped cutout along the edge or end of lumber
To cut a rabbet in a piece of material
in a rabbet joint
An L-shaped groove cut along or near the edge of a piece of wood
{f} join or attach boards together with rabbets; be joined or connected by rabbets
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint
to rabbet
Favoriten
Mehr...
Löschen