son veren

Türkisch - Englisch

Definition von son veren im Türkisch Englisch wörterbuch

an electrical device that absorbs reflection at the end of a transmission line

The boundary between the light side and the dark side of a planet or other body

The line formed by the edge of the illuminated portion of the Moon

The dividing line between the illuminated and shadowed portions of the lunar or planetary disk

The line of sunrise or sunset on a planet or its satellite At dawn and dusk when the sun is lowest in the sky (low sun), topographic features cast their longest shadows This reveals information about the size and shape of the objects casting the shadows Therefore, features near the terminator are imaged in order to obtain morphologic information (see High sun)

A resistor at the end of a SCSI chain that prevents the signal from reflecting back along the chain

Electrical circuitry at the end of a cable to prevent the reflection of electrical signals when they reach the end of the cable In SCSI systems, this electrical circuitry is called a terminator It should be noted that any SCSI bus segment requires two terminators and only two terminators Not one, not three, but two terminators Also, the terminators must be installed at the very ends of the SCSI cable, not at devices in the middle of the bus Terminators require power that is usually provided by the host adapter on the TERMPWR line(s) on the bus Many SCSI devices power their own terminators There are five basic types of SCSI termination: Active, active negation, FPT, LVD (including LVD/SE) and passive

Used on both ends of a standard Ethernet or Thinwire Ethernet segment, this special connector provides the 50 ohm termination resistance needed for the cable

{i} one who finishes; border between light and shadow

one who finishes

The dividing line between the illuminated and the unilluminated part of the moon's or a planet's disk

An imaginary, diffuse line separating the illuminated and dark portions of a celestial body There are two terminators: morning and evening

An electrical impedance attached to the open end of a transmission line to eliminate reflections Electrical circuitry at the end of a cable designed to match impedance for the purpose of preventing the reflection of electrical signals when they reach the end of the cable

Electrical resistance at the ends of a line that absorbs signals on the line This keeps the signals from bouncing back down the line to be heard again by network stations If a network is open - a terminator is off, network functionality ceases

someone who exterminates (especially someone whose occupation is the extermination of troublesome rodents and insects)

A device that provides electrical resistance at the end of a transmission line Its function is to absorb signals on the line, thereby keeping them from bouncing back and being received again by the network

A resistive load to indicate the end a chain of devices, usually a SCSI chain or a coax network chain

A device attached to the last peripheral in a series, or the last node on a network

The boundary between the lighted and unlighted portions of a celestial body's surface

son ver