metal damlalık

Türkisch - Englisch

Definition von metal damlalık im Türkisch Englisch wörterbuch

flashing

The process of getting rid of gaps on shelves by bringing products from the back of the shelf to the front to create a 'fuller' shelf

Sheet metal or other material used in roof and wall construction to protect a building from water infiltration

sheet metal shaped and attached to a roof for strength and weatherproofing

Cf

Pieces of metal, built into the joints of a wall, so as to lap over the edge of the gutters or to cover the edge of the roofing; also, similar pieces used to cover the valleys of roofs of slate, shingles, or the like

A thin continuous sheet of metal, plastic, rubber or water proof paper used to prevent the passage of water through a joint

(1) Sheet metal or roll roofing pieces fitted to the joint of any roof intersection, penetration or projection (chimneys, copings, dormers, valleys, vent pipes, etc ) in order to prevent water leakage (2) The building component used to connect portions of a roof, deck, or siding material to another surface such as a chimney, wall, or vent pipe Often made out of various metals, rubber or tar and is mostly intended to prevent water entry

Sheet metal or other material applied to seal and protect the joints formed by different materials or surfaces

The blinking of a light source, such as a light bulb or computers cursor

present participle of flash

Sheet metal or other material used in roof and wall construction (especially around chimneys and vents) to prevent rain or other water form entering

Pieces of metal or roll roofing used to prevent seepage of water into a building around any intersection or projection in a roof such as vent pipes, chimneys, adjoining walls, dormers, and valleys Galvanized metal flashing should be minimum 28-gauge

The waterproofing covering placed to set up certain points in brick masonry to hold water or to direct any moisture outside the wall

The building component used to connect portions of a roof, deck, or siding material to another surface such as a chimney, wall, or vent pipe Often made out of various metals, rubber or tar and is mostly intended to prevent water entry

Components used to seal the roof system at areas where the roof covering is interrupted or terminated For example, pipes, curbs, walls, etc all have special components that, when correctly installed, will help prevent moisture entry into the roof system or building

components used to weatherproof or seal the roof system edges at perimeters, penetrations, walls, expansion joints, valleys, drains and other places where the roof covering is interrupted or terminated For example, membrane base flashing covers the edge of the field membrane, and a cap flashing or counterlfashings shield the upper edges of the base flashing

A mode of covering transparent white glass with a film of colored glass

The application of a very thin layer of glass of one color over a layer of contrasting color This is achieved by dipping a gather of hot glass into a crucible containing hot glass of the second color The uppe r layer may be too thin to be worked in relief "Flashing" is sometimes used (erroneously) as a synonym for casing

sheet metal shaped and attached to a roof for strength and weatherproofing emitting light in sudden short or intermittent bursts; "flashing lightning and roaring thunder

A material, such as sheet metal, used in roof and wall construction to shed water

Silbentrennung

me·tal dam·la·lık