gözaltı torbaları

listen to the pronunciation of gözaltı torbaları
Türkisch - Englisch
pockets
he undesirable formation of large cavities or pockets in the foam structure Pocketing is usually caused by rapid formation and/or release of the blowing agent before the polymer structure has gained sufficient strength to contain the gas
When pockets form in 5D they can be oriented in other ways than the default
plural of pocket
any opening built into a binder for storing loose sheets These can be any size or shape because special dies can create whatever effect you desire
third-person singular of pocket
Pockets on tuxedos can be flap, or besom (inset and trimmed in satin)
The undesirable formation of large cavities or pockets in the foam structure Pocketing is usually caused by rapid formation and/or release of the blowing agent before the polymer structure has gained sufficient strength to contain the gas [Also see "Splits" ]
Pockets are hems welded into the vinyl to accept gripper bars for vinyl installation They are similar to a hem in a curtain Pockets will be a standard 3" (top, bottom, & sides) This results in a pocket with a 6" circumference In terms of the vinyl face, the "pocket" is more accurately described as a "margin " A 14' image with 3" bleeds and 3" pockets (or margins) yields a finished size of 15' (Also referred to as "wrap ") Regardless of whether a board is printed with or without bleeds or margins, the mechanical pocket still exists This pocket typically is 4" of material, folded over and seamed with a 1" seam yielding a 3" pocket
gözaltı torbaları
Favoriten