Englisch - Türkisch
Definition von chamfered im Englisch Türkisch wörterbuch
- pahlı
- yivli
- oluklu
- chamfer
- pahlı
- chamfer
- (Mekanik) kırma
- chamfer
- kubbe
- chamfer
- keskin
- chamfer
- oluk
- chamfer
- oluk açmak
- chamfer
- yiv
- chamfer
- yiv açmak
- chamfer
- oluk aç
- chamfer
- şev
- double chamfered drill
- çift ağızlı matkap
- chamfer
- Pahlamak
- chamfer
- {i} şev açma aleti
- chamfer
- chamfer bit havşa
- chamfer
- {f} şev yapmak
- chamfer
- (İnşaat) pah (şev)
- chamfer
- {i} kanal
- chamfer
- pah
Relevante Übersetzungen
Englisch - Englisch
Definition von chamfered im Englisch Englisch wörterbuch
- past of chamfer
- chamfer
- to cut a groove in something; to flute
- chamfer
- to cut off the edge or corner of something; to bevel
- chamfer
- an edge or end bevel that does not go all the way
- chamfer
- To bevel the inside of a case mouth The bevel allows bullets to start into the case mouth without crushing the case
- chamfer
- an angled relief or cut at an edge added for a finished appearance and to break sharp edges
- chamfer
- The flat surface formed by cutting off a sharp corner, usually at an angle of 45 degrees
- chamfer
- A bevelled edge made on a corner of a workpiece at 45 degrees
- chamfer
- A beveled edge on a fastener The chamfer angle is measured from the normal to the axis of the fastener
- chamfer
- surface made by cutting across the square angle of a stone block, piece of wood, etc , at an angle of 45° to the other two surfaces
- chamfer
- {f} cut a sloping edge, bevel
- chamfer
- A beveled edge
- chamfer
- A simple bevel done for embellishment of a timber
- chamfer
- {i} slope, slanted edge
- chamfer
- The surface formed by cutting away the arris, or angle, formed by two faces of a piece of timber, stone, etc
- chamfer
- A bevel, a corner or edge removed, a relief
- chamfer
- A beveled or sloping edge (typically 45°) to reduce the sharp intersection of two faces
- chamfer
- Corner of a board beveled at a 45angle Two board butt-jointed with chamfered edges form a V-joint
- chamfer
- A sloping or bevelled edge
- chamfer
- A beveled surface to eliminate an otherwise sharp corner
- chamfer
- A beveled edge, technically one of 45 degrees
- chamfer
- Surface made by smoothing off the angle between two stone faces
- chamfer
- cut a bevel on; shape to a bevel; "bevel the surface"
- chamfer
- The conical feature at the end of the rivet nut shank The chamfer makes the fastener easier to place in the installation hole
- chamfer
- The surface made when the sharp edge of a stone block or a piece of wood is cut away, usually at an angle of 45-degrees to the other two surfaces
- chamfer
- To cut a furrow in, as in a column; to groove; to channel; to flute
- chamfer
- A beveled edge or corner, such as one cut at a 45 degree angle (see figure, right)
- chamfer
- A corner or edge that is cut at an angle or beveled
- chamfer
- an oblique surface cut on the edge or corner of a board, usually sloping at forty-five degrees
- chamfer
- To make a chamfer on
- chamfer
- cut a furrow into a columns
- chamfer
- To bevel a sharp external edge To cut a line across two linear elements, connecting the elements and modifying either one or both of the original elements A planar transition between two faces of a solid
- chamfer
- To bevel or slope an edge or corner
- chamfer
- The cutting of stone at an angle to give expansion to a window or door rather than leaving just a squared-off opening (i e , planed-off edges)
- chamfer
- two surfaces meeting at an angle different from 90 degrees
Relevante Übersetzungen
chamfered
Aussprache
Etymologie
[ 'cham(p)-f&r, 'cham-p& ] (transitive verb.) circa 1573. back-formation from chamfering, alteration of Middle French chanfreint, from past participle of chanfraindre to bevel, from chant edge + fraindre to break, from Latin frangere; more at CANT, BREAK.Resimler
Historie
Favoriten