Metal tubes used to keep roof gutters open Long nails (ferrule spikes) are driven through these tubes and hold the gutters in place along the fascia of the home
an often metal cap attached to the end of a slender shaft for strength or to prevent splitting
A ferrule is a metal or rubber cap that is fixed onto the end of a stick or post in order to prevent it from splitting or wearing down. a piece of metal or rubber put on the end of a stick to make it stronger (verrel (15-19 centuries) (influenced by ferrum ), from viriola )
A metal band at either end of the grip used to secure the leather or wire wraps Also used as a decoration
{i} ring shaped reinforcement; metal cap placed on the end of a shaft to protect it (i.e. on the end of an umbrella, cane, etc.)
custom machined round connector May be straight cylinder or stepped outside DIA Please specify size of ferrule when possible
a metal cylinder placed over a hose end to affix the fitting to the hose See braid sleeve, interlocking ferrule, and sleeve
Metal band or socket in which the terminal of a wire or wire rope is fastened securely (32)
A ring or band arounda pipe's shank Commonly seen materials for pipe ferrules are acrylic, silver, horn and bone
A component with a precise capillary which holds a fiber in place and aids in its alignment The typical ferrule has an OD of 2 5mm, and a capillary of about 126 microns Singlemode versions normally carry tolerances on OD, ID and concentricity of one micron or less The material of choice since the late 80s has been tetragonal zirconia with a grain size less than 0 5 microns
Same as arm mount The metal fittings on both ends of a crystal arm These fittings hold the crystal piece
a small metal sleeve placed inside a gutter at the top A spike is nailed through the gutter into the fastening board The ferrule acts as a spacer in the gutter to maintain its original shape
bir dişi desteklemek için tatbik edilen madeni çember
Silbentrennung
bir di·şi des·tek·le·mek i·çin tat·bik e·di·len ma·de·ni çem·ber