damla kenar

listen to the pronunciation of damla kenar
Türkçe - İngilizce
drip edge
A metal flashing or other overhanging component with an outward projecting lower edge, intended to control the direction of dripping water and help protect underlying building components
The strip of metal extending out beyond the eaves or rakes to prevent rainwater from rolling around the shingles back onto the wooden portion of the house The profile of drip edge is shown at the right Back to Top
metal edging strips placed on roof edges to provide
A noncorrosive, nonstaining material used along the eaves and rakes to allow water runoff to drip clear of underlying construction
A device designed to prevent water from running back or under an overhang
A metal strip placed along the edge of a roof to divert water
A non-corrosive, non-staining material used along the eaves and rakes to allow water runoff to drip clear of underlying construction
-A lip or protrusion on the lower outside edge of logs that forces rainwater to drain down the exterior face of a log wall and past the seams between logs
A metal flashing bent at a 90º angle that is installed along the roof edge It’s function is to help direct runoff water away from the building and to terminate and secure the edge of the roof membrane
A steel flashing bent at a 90º angle that is placed along the outer perimeter of steep sloped buildings; used to help direct runoff water away from the building Drip Edge resembles nosing except that it has an outwardly-angled bottom edge (preferably hemmed) To see the difference between Drip Edge and Nosing, click here
usually metal strip used on eves and rakes to allow for water run off without damaging underlying materials
A non-corrosive, non-staining material used along the eaves and rakes to allow water run-off to drip clear of underlying construction
Found at the edge of a roof, used to prevent water penetration
a metal flashing, or other overhang component, with and outward projecting lower edge, intended to control the direction of dripping water and help protect underlying building components A drip edge also can be used to break the continuity of contact between the roof perimeter and wall components to help prevent capillary action
A narrow preformed piece of sheet metal placed along the edge of a roof line so it overhangs the edge of the roof and allows water to be carried beyond the roof edge and drip directly to the ground
damla kenar