chamfer

İngilizce - Türkçe

chamfer teriminin İngilizce Türkçe sözlükte anlamı: pahlı; (Mekanik) kırma; yiv açmak; oluk; oluk açmak; yiv; oluk aç; şev; Pahlamak; {i} şev açma aleti; chamfer bit havşa; {f} şev yapmak; (İnşaat) pah (şev); {i} kanal; kubbe; keskin; pah
chamfer angle: (Mekanik) pah açısı
chamfer angle: (Mekanik) kırma açısı
chamfer length: (Mekanik) kırma boyu
chamfer length: (Mekanik) pah boyu
chamfer plane: pah rendesi
chamfer bit: havsa
chamfer plane: (Marangozluk) perdah rendesi
chamfer strip: oluklu çıta
chamfered: pahlı
chamfered: yivli
chamfered: oluklu

İngilizce - İngilizce

chamfer teriminin İngilizce İngilizce sözlükte anlamı: to cut a groove in something; to flute; to cut off the edge or corner of something; to bevel; an angled relief or cut at an edge added for a finished appearance and to break sharp edges; an edge or end bevel that does not go all the way; To bevel the inside of a case mouth The bevel allows bullets to start into the case mouth without crushing the case; The flat surface formed by cutting off a sharp corner, usually at an angle of 45 degrees; A bevelled edge made on a corner of a workpiece at 45 degrees; A beveled edge on a fastener The chamfer angle is measured from the normal to the axis of the fastener; surface made by cutting across the square angle of a stone block, piece of wood, etc , at an angle of 45° to the other two surfaces; {f} cut a sloping edge, bevel; A beveled edge; A simple bevel done for embellishment of a timber; {i} slope, slanted edge; The surface formed by cutting away the arris, or angle, formed by two faces of a piece of timber, stone, etc; A bevel, a corner or edge removed, a relief; A beveled or sloping edge (typically 45°) to reduce the sharp intersection of two faces; Corner of a board beveled at a 45angle Two board butt-jointed with chamfered edges form a V-joint; A sloping or bevelled edge; A beveled surface to eliminate an otherwise sharp corner; A beveled edge, technically one of 45 degrees; Surface made by smoothing off the angle between two stone faces; cut a bevel on; shape to a bevel; "bevel the surface"; The conical feature at the end of the rivet nut shank The chamfer makes the fastener easier to place in the installation hole; The surface made when the sharp edge of a stone block or a piece of wood is cut away, usually at an angle of 45-degrees to the other two surfaces; To cut a furrow in, as in a column; to groove; to channel; to flute; A beveled edge or corner, such as one cut at a 45 degree angle (see figure, right); A corner or edge that is cut at an angle or beveled; an oblique surface cut on the edge or corner of a board, usually sloping at forty-five degrees; To make a chamfer on; cut a furrow into a columns; To bevel a sharp external edge To cut a line across two linear elements, connecting the elements and modifying either one or both of the original elements A planar transition between two faces of a solid; To bevel or slope an edge or corner; The cutting of stone at an angle to give expansion to a window or door rather than leaving just a squared-off opening (i e , planed-off edges); two surfaces meeting at an angle different from 90 degrees
chamfer bit: a bit that is used for beveling
chamfer plane: a plane that makes a beveled edge
A chamfer: chamfret
chamfered: past of chamfer

chamfer

Heceleme

cham·fer

Eş anlamlılar

round

Zıt anlamlılar

fillet

Telaffuz

Etimoloji

[ 'cham(p)-f&r, 'cham-p& ] (transitive verb.) circa 1573. back-formation from chamfering, alteration of Middle French chanfreint, from past participle of chanfraindre to bevel, from chant edge + fraindre to break, from Latin frangere; more at CANT, BREAK.