Fluid cement is mixed at the surface, pumped to the bottom of a cased well, forced to flow around the lower end of the casing and up into the space between the casing and the borehole When the cement solidifies (sets), it holds the casing in place, and provides support
A building material which, when mixed with water and other materials, hardens and becomes a binding agent May refer to mortar, Portland cement, plaster of Paris (gypsum) and others
A putty or other compound that is used to weatherproof stained glass projects that are to be used for doors or windows The cement is forced between the came and the glass It also adds strength and keeps the glass from rattling
A dispersion of "solution" of unvulcanized rubber or a plastic in a volatile solution This meaning is peculiar to plastics and rubber industries and may not be an adhesive composition
If things are cemented together, they are stuck or fastened together. Most artificial joints are cemented into place. Agent that binds concrete and mor(Tarih) Cements are finely ground powders that, when mixed with water, set to a hard mass. The cement of 2,000 years ago was a mixture of ash and lime. Volcanic ash mined near the city of Puteoli (now Pozzuoli), near Naples, was particularly rich in essential aluminosilicate minerals, giving rise to the pozzolana cement of the Roman era. See also portland cement
Usually refers to portland cement which when mixed with sand, gravel, and water forms concrete Generally, cement is an adhesive; specifically, it is that type of adhesive which sets by virtue of a chemical reaction
In concrete work, the dry powder that, when it has combined chemically with the water in the mix, cements the particles of aggregate together to form concrete
a substance that can be used to build together aggregates of sand or stone into a cohesive structure May be a single compound or a mixture May be hydraulic set, air set or chemical set
(1) A powder consisting of alumina, silica, lime, and other substances which hardens when mixed with water Extensively used in the oil industry to bond casing to the walls of the wellbore (2) A secondary mineral growth of chemically precipitated material on the surfaces and in the interstices of clastic sediments Authigenic clay minerals are not considered cement (3) To fix the casing firmly in the hole with cement, which is pumped through the drill pipe to the bottom of the casing and up into the annular space between the casing and the walls of the borehole After the cement sets (hardens) it is drilled out of the casing The casing can be perforated to allow reservoir fluids to enter the well
something that hardens to act as adhesive material a building material that is a powder made of a mixture of calcined limestone and clay; used with water and sand or gravel to make concrete and mortar concrete pavement is sometimes referred to as cement; "they stood on the gray cement beside the pool"
Fused to the bottom surface of the insole to reinforce the shoe and support the arch of the wearer After lasting, the surfaces of both the upper and the outsole are carefully roughed to remove the outer layer of material After roughing, cement is applied to both surfaces Immediately before the upper and outsole are put together in the outsole attaching machine, the dry cement on the outsole must be "activated" that is, brought into the proper condition for bonding The cemented outsole and upper are placed into an activating device where the cement film is properly conditioned by heat to the required state for secure bonding to the cemented upper The outsole and upper are taken from the activator, quickly assembled by hand to the lasted upper, and promptly placed into the sole attaching machine This machine immediately exerts adequate pressure on the shoe, bonding the outsole to the upper