A joint formed by mating two separate sections of materials. Seams can be made or sealed in a varity of ways, including adhesive bonding, hot-air welding, solvent welding, using adhesive tapes, sealant, etc
An old English measure of glass, containing twenty-four weys of five pounds, or 120 pounds
line formed by joining two edges, as in: Every seam bulged when he tried on his old army uniform
The splice line formed by two or more separate pieces of flexible polyurethane foam that have been bonded together
joint consisting of a line formed by joining two pieces a stratum of ore or coal thick enough to be mined with profit; "he worked in the coal beds" put together with a seam; "seam a dress
point at which the flat steel sheet has been rolled and electrically welded to form a cylinder
The junction line of metal that has passed through a hollow die, separated and rejoined at the exit point Seams are present in all extruded hollows produced from the extrusion process and in many cases are not visible
a ride on a piece of glass caused by the minute crack between two parts of the mold Same as a mold mark
To make the appearance of a seam in, as in knitting a stocking; hence, to knit with a certain stitch, like that in such knitting
If something is coming apart at the seams or is falling apart at the seams, it is no longer working properly and may soon stop working completely. Britain's university system is in danger of falling apart at the seams
The place where two edges of fabric or elastomer are adjacent to each other to form a single ply or layer
{i} stitches used to fasten two pieces of material; line where two pieces are stitched together; crease, wrinkle; crack, furrow, groove; thin layer of rock or mineral (Geology)
A ridge on a piece of molded clayware or glassware caused by the minute crack between two parts of the mold Same as the mold mark
Hence, a line of junction; a joint; a suture, as on a ship, a floor, or other structure; the line of union, or joint, of two boards, planks, metal plates, etc
a stratum of ore or coal thick enough to be mined with profit; "he worked in the coal beds"
A line, ridge, or groove formed from fitting, joining, or lapping two components
A seam of coal is a long, narrow layer of it underneath the ground. The average UK coal seam is one metre thick
joint consisting of a line formed by joining two pieces a stratum of ore or coal thick enough to be mined with profit; "he worked in the coal beds"
A finished edge on flat glass or mirrors on which the sharp corners are removed by an abrasive belt to form a semirounded edge
A defect referring to an unbonded fold or lap on the surface of the rod, which appears as a crack; usually the result of defects in casting or rolling that have not bonded shut
a joint formed by mating two separate sections of material Seams may be made or sealed in a variety of ways, including adhesive bonding, hot-air welding, solvent welding, using adhesive tape, sealant, etc