الإنجليزية - التركية
تعريف to rabbet في الإنجليزية التركية القاموس.
- lambalı geçme yapmak
- (Arılık) kanal
- (Mimarlık,Teknik) lamba
- fatura
- lambalı geçme yapmak
- zıvana
- {i} oluk
- yivli tahtalarla birbirine bindirilen yer
- yivli tahtalan birbirine bindirmek
- rabbet plane oluk rendesi
- {f} oluk açmak
- {i} yiv
- {i} lambalı geçme
- {i} lambalı geçme (kapı)
- {f} birbirine geçirmek
- aşoz
الإنجليزية - الإنجليزية
تعريف to rabbet في الإنجليزية الإنجليزية القاموس.
- A longitudinal channel, groove, or recess cut out of the edge or face of a plank of wood or other material; especially, one intended to fit another member to form a joint
- To cut a [[#Noun|rabbet]] in a piece of material
- a rectangular groove made to hold two pieces together
- The section of the door frame recessed to receive the door
- The recess or offset formed in the door frame to receive the door
- cut a rectangualr groove into
- {i} groove or notch in a timber into which another timber is inserted (for joining timbers without using nails or screws)
- Rectangular cut of two surfaces
- A rectangular longitudinal groove cut in the corner edge of a board or plank
- The ledge in a piece of frame molding where the glass, mats, and print or mirror sits It is usually a 1/4 inch wide
- Same as Rabbet joint, below
- Any rectangular piece of lumber with a rectangular longitudinal ell cutout at one of its edges to make a rabbeted, lapped joint Also referred to as shiplap lumber
- A cut partway through the edge of a board that is used as a part of a joint
- Rectangular cut of two surfaces
- A groove cut in a board to receive another board
- A groove or cut made in a piece of timber in such a way that the edges of another piece could be fit into it to make a tight joint
- a rectangular groove made to hold two pieces together cut a rectangualr groove into join with a rabbet joint
- To cut a rabbet in; to furnish with a rabbet
- A longitudinal channel, groove, or recess cut out of the edge or face of any body; especially, one intended to receive another member, so as to break or cover the joint, or more easily to hold the members in place; thus, the groove cut for a panel, for a pane of glass, or for a door, is a rabbet, or rebate
- A channel, groove, or recess cut into the edge or face of a surface, intended to receive another member
- 1) Rectangular slot or groove in joinery 2) A recess in the meeting stiles of cabinet doors so that when one shuts against the other it forms a dustproof joint
- The recess or offset formed in the frame to receive door
- A two-sided L-shaped recess in sash or frame to receive lites or panels
- To unite the edges of, as boards, etc
- Or rebate; a groove incised along a timber to receive the edge of a plank or strake The most common rabbets are the keel rabbet which receives the garboard, and the rabbet of the stem and stern post which receives the strake ends
- A "L" shaped groove cut into the side of a wood component
- join with a rabbet joint
- A square groove cut along the edge of a plank
- A rectangular shape consisting of two surfaces cut along the edge or end of a board
- an L-shaped cutout along the edge or end of lumber
- To cut a rabbet in a piece of material
- in a rabbet joint
- An L-shaped groove cut along or near the edge of a piece of wood
- {f} join or attach boards together with rabbets; be joined or connected by rabbets
- A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint