rise time

listen to the pronunciation of rise time
الإنجليزية - التركية
yükselme süresi
yetişme süresi
(Çevre,Teknik) yükselme zamanı
yükseliş süresi
(Nükleer Bilimler) çıkış zamanı
yükselim süresi

المصطلحات ذات الصلة

pulse rise time
(Bilgisayar) vurum yükselme süresi
pulse rise time
(Bilgisayar,Teknik) darbe yükselme süresi
pulse rise time
darbe (vurum) yukselme suresi
الإنجليزية - الإنجليزية
The time required for the voltage in a switching electronic circuit to rise from 10% to 90% of its nominal final value
THE TIME REQUIRED FOR A SENSOR OR SYSTEM TO RESPOND TO AN INSTANTANEOUS STEP FUNCTION, MEASURED FROM THE 10% TO 90% POINTS ON THE RESPONSE WAVEFORM IN TEMP MEASUREMENT, SEE RESPONSE TIME
The time required for the output of a transducer to rise from 10% to 90% of its final value, as it responds to a step change in the measurand
The length of time for the output of a transducer to rise from 10% to 90% of its final value as a result of a step-change of measurand *
The time required for a variable to change from its baseline value to a given percentage (usually 90%) of its intended final value
The rate of time the thermostat is allowed to rise in temperature until it reaches a point that causes the snap disc to operate
the time taken for the leading edge of a pulse to rise from 10% to 90% of its final value
  In the approximation of a step function, the time required for a signal to change from a specified low value to a specified high value   Typically, these values are 10% and 90% of the step height   (188)
The time taken for a signal (optical or electrical) to rise from low level to peak value (usually taken as the time from 10% to 90% of peak)
The time required for the leading edge of a pulse to rise from 10% to 90% of its amplitude; the time required for a component to produce such a result "Turn-on time "
tr The time for the output current of a photodiode to rise from 10% to 90% of final level in response to an instantaneous rise in input light power Range: from a few ps to tens of ms
The time taken to make a transition from one state to another, usually measured between the 10% and 90% completion points of the transition Alternatively the rise time may be specified at the 20% and 80% amplitudes Shorter or faster rise times require more bandwidth in a transmission channel
The time required for the leading edge of a pulse to rise from one-tenth of its final value to nine-tenths of its final value Rise time is proportional to time constant See decay time
The time taken for the leading edge of a pulse to rise from its minimum to its maximum values (typically measured from 10% to 90% of these values)
The time it takes for output to rise from low values, say 10%, to high values, say 90% of peak power
rise time
المفضلات
المزيد...
امسح