hatların karışmas

listen to the pronunciation of hatların karışmas
التركية - الإنجليزية
crosstalk
undesirable signals from a neighbouring transmission circuit; undesired coupling between circuits
Interference in a communications channel caused by a signal traveling in an adjacent channel
A phenomena where the audio from one channel bleeds into another causing an undesirable effect This is present in all electronics to some extent or another and will be rated in dB when there is a rating on the equipment It also is the unwanted signal that gets passed between audio lines that are too close together
For an analog-to-digital converter (ADC) with more than one input, crosstalk is the amount of signal from one analog input that appears on the measured analog input This value is typically specified in decibels For a digital-to-analog converter (DAC), crosstalk is the amount of noise that appears on the DAC output(s) when another DAC is being updated
Noise or interference caused by electromagnetic coupling from one signal path to another Crosstalk performance is generally expressed in decibels
The phenomenon in which a signal transmitted on one circuit or channel of a transmission system creates an undesired effect in another circuit or channel, generally related to wire placement, shielding, and transmission techniques
Interference received in one communication channel from signals conveyed by other communication channels
Unwanted interference from another adjacent communications channel The signal from the adjacent channel is inserted into the original communications channel
Interfaces or presence of unwanted signals from one transmission channel, detected on another (usually parallel) channel
the phenomenon whereby telecommunications signals on one circuit can leak across to another, potentially degrading the performance on the affected circuit
Undesirable leakage of a signal from one channel into another, decreasing of channel separation
the presence of an unwanted signal via an accidental coupling
The unwanted transfer of energy (signal) from one circuit to another circuit Crosstalk interferes with the desired data signal Handheld cable testers can be used to determine the level of unwanted crosstalk in network cabling
The unwanted transfer of a signal from one circuit to another
{i} informal conversation, chat; fast and witty conversation; (Telecommunications) interference caused by the mixing of two frequencies that are traveling on different channels (as on a telephone or radio)
Leakage of an audio signal into a channel that iris not intended to be in, from an adjacent or nearby channel
The presence of an unwanted signal "leaking" into another Listening to binaural (dummy head) signals over stereo loudspeakers is unsatisfactory because of the unwanted leakage of sound from the right loudspeaker to the left ear, and the unwanted sound from the left loudspeaker to the right ear These unwanted components are called crosstalk
The coupling of unwanted signals from one pair within a cable to another pair Crosstalk can be measured at the same (near) end or far end with respect to the signal source
Interference caused by "leaks" from a nearby communication channel
A type of interference caused by audio frequencies from one pair of conductors being coupled into adjacent pairs
hatların karışmas
المفضلات