şev açma aleti

التركية - الإنجليزية

تعريف şev açma aleti في التركية الإنجليزية القاموس.

chamfer

to cut a groove in something; to flute

to cut off the edge or corner of something; to bevel

an edge or end bevel that does not go all the way

To bevel the inside of a case mouth The bevel allows bullets to start into the case mouth without crushing the case

an angled relief or cut at an edge added for a finished appearance and to break sharp edges

The flat surface formed by cutting off a sharp corner, usually at an angle of 45 degrees

A bevelled edge made on a corner of a workpiece at 45 degrees

A beveled edge on a fastener The chamfer angle is measured from the normal to the axis of the fastener

surface made by cutting across the square angle of a stone block, piece of wood, etc , at an angle of 45° to the other two surfaces

{f} cut a sloping edge, bevel

A beveled edge

A simple bevel done for embellishment of a timber

{i} slope, slanted edge

The surface formed by cutting away the arris, or angle, formed by two faces of a piece of timber, stone, etc

A bevel, a corner or edge removed, a relief

A beveled or sloping edge (typically 45°) to reduce the sharp intersection of two faces

Corner of a board beveled at a 45angle Two board butt-jointed with chamfered edges form a V-joint

A sloping or bevelled edge

A beveled surface to eliminate an otherwise sharp corner

الواصلة

şev aç·ma a·le·ti