çukura yerleştirme

التركية - الإنجليزية

تعريف çukura yerleştirme في التركية الإنجليزية القاموس.

{i} pitting

The formation of pits on a surface because of corrosion

(Mühendislik) Pitting or pitting corrosion, is a form of extremely localized corrosion that leads to the creation of small holes in the metal

The appearance of small depressions or cavities produced during solidification or corrosion

the formation of small pits in a surface as a consequence of corrosion

A condition on bits that is caused by the presence of foreign material such as rock cutting or the use of rock drill oil with a high sulphur content

A form of wear characterized by the presence of surface cavities, the formation of which is attributed to processes such as fatigue, local adhesion, cavitation or corrosion

Gal-vanic attack under moist and acidic conditions between molecular structures of differing alloy content

A form of extremely localized attack characterized by holes in the metal Pitting is one of the most destructive and insidious forms of corrosion Depending on the environment and the material, a pit may take months, or even years, to become visible

present participle of pit

A small depression in the surface of the decoration, perhaps caused by tiny bubbles in the glaze, or if a sharp rough spot is present, perhaps caused by spalling fire brick

The presence of pin holes or small craters in the solder joint caused by oxidation, plating material or other foreign incompatible matter Such joints are generally also dull in finish

(Inter-Crystalline Corrosion) -- Galvanic attack under moist and acidic conditions between molecular structures of differing alloy content

Corrosion type, for which the electrolytic metal removal extends only on small surface areas and results in the formation of local cavities (crater-shaped, pinhole-type) Because the amount of the produced corrosion products is only small, pitting is mostly recognized only when leakages occur

Highly localised corrosion in which penetration into the metal occurs, with consequent danger of perforation [back] [top]

Forming small sharp cavities in a metal surface by nonuniform electro-deposition or by corrosion

Damage to a metal surface that takes the form of one or a series of small craters or pits in the surface This is a type of failure often seen in worn-out bearing cones

Forming small sharp cavities in a metal surface by non-uniform electrode position or by corrosion

Localised surface defects on metals, in the form of small depressions, or "pits"

المصطلحات ذات الصلة

çukura yerleştirmek

pit

الواصلة

çu·ku·ra yer·leş·tir·me