sal yapan kimse

التركية - الإنجليزية

تعريف sal yapan kimse في التركية الإنجليزية القاموس.

rafter

one of a series of sloped beams that extend from the ridge or hip to the downslope perimeter or eave, designed to support the roof deck and its associated loads

To furnish with rafters, as a house

To make into rafters, as timber

one of several parallel sloping beams that support a roof provide (a ceiling) with rafters

To plow so as to turn the grass side of each furrow upon an unplowed ridge; to ridge

A roof structural support system using "2 by" wood components that are nailed together (as opposed to trusses that are connected using press-on metal plates) (See truss)

Rafters form the slope of a pitched roof and are analogous to floor joists

One of the sloped parallel boards that make up a roof structure

A structural member that supports a pitched roof, serving for the roof sheathing the same purpose as joists for floors

provide (a ceiling) with rafters

Now, commonly, one of the timbers of a roof which are put on sloping, according to the inclination of the roof

In timber roof construction, a principal sloping component that runs from the wall plate to the ridge

The main beam supporting a roof system or a sloping roof framing member

{i} sloped beam that forms the framework of a roof; person who participates in the sport of white-water rafting; one who travels by raft; one who transports by raft

The framing member which directly supports the roof sheathing A rafter usually follows the angle of the roof, and may be a part of a roof truss The supporting framing member immediately beneath the deck, sloping from the ridge to the wall plate

of Queen-post

Rafters are the sloping pieces of wood that support a roof. From the rafters of the thatched roofs hung strings of dried onions and garlic. one of the large sloping pieces of wood that form the structure of a roof

One of a series of structural members of a roof designed to support roof loads

The structural members comprising the roof and providing support for the covering A variety of special rafters (hip, valley, jack, common, fly, etc ) may be called for, depending on the type of roof Back to alphabetical list

The pitched roof board used in conventional framing This is also referred to as the “top chord” of the truss

الواصلة

sal ya·pan kim·se