الإنجليزية - التركية
تعريف countersunk في الإنجليزية التركية القاموس.
- havşa başlı
- gömülmüş
- gömme
- uydur/genişlet
- countersunk head bolt
- gömme başlı cıvata
- countersunk head
- gömme baş
- countersunk head bolt
- gömme başlı civata
- countersunk bolt
- havşa başlı civata
- countersunk bolt
- havşa baş cıvata
- countersunk head
- havsa başlı veya
- countersunk head
- havsa başlı
- countersunk hole
- havşa delik
- countersunk nibbed bolt
- havşalı tırnaklı vida
- countersunk rivet
- havşabaşlı perçin
- countersunk screw
- (Otomotiv) gömme vida
- countersunk screw
- gömme başlı vida
- countersunk screw
- (Otomotiv) havşa başlı vida
- countersunk screw
- havsa basis vida
- countersink
- cıvata
- countersink
- havşa matkabı
- countersink
- havşa açmak
- countersink
- (Endüstri) 1. Havsa, havsa açmaya mahsus kalem.2: Havsa açmak
- countersink
- havşa açma kalemi
- countersink
- havşa
- countersink
- uydur/genişlet
- countersink
- genişletme vida
- countersink
- (fiil) havşa açmak
المصطلحات ذات الصلة
الإنجليزية - الإنجليزية
تعريف countersunk في الإنجليزية الإنجليزية القاموس.
- That has a flat conical top allowing it to be inserted flush with a surface
- Past participle of countersink
- {s} make (the head of a bolt, nail, etc.) flush or level with a surface
- Sunk into a chamfer; as, a countersunk bolt
- Chamfered at the top; said of a hole
- Beveled on the lower side, so as to fit a chamfered countersink; as, a countersunk nailhead
- countersunk hole
- A hole which is drilled into a surface, so that when a screw is inserted, the screw head is level with the surface
- countersink
- to create such a conical recess
- countersink
- The chamfered end of a hole that receives a flat head screw
- countersink
- To cut a tapered recess which allows the head of a screw to lie flush with a surface or The tapered recess itself
- countersink
- To drive a nail or screw below the surface
- countersink
- for the reception of the head of a screw or bolt below the surface, either wholly or in part; as, to countersink a hole for a screw
- countersink
- The larger diameter at the entrance of a machined hole with a conical bottom Similar to a counterbore except for the bottom configuration The general use of a countersink if for use with flat head screws and bolts
- countersink
- a hole (usually in wood) with the top part enlarged so that a screw or bolt will fit into it and lie below the surface
- countersink
- A drill or cutting tool for countersinking holes
- countersink
- a conical recess, typically machined around a hole to admit a screw so that it sits flush with a surface
- countersink
- To chamfer or form a depression around the top of a hole in wood, metal, etc
- countersink
- a bit for enlarging the upper part of a hole
- countersink
- A device to counterbore a hole for the head of a flat head screw
- countersink
- To cause to sink even with or below the surface; as, to countersink a screw or bolt into woodwork
- countersink
- insert (a nail or screw below the surface, as into a countersink)
- countersink
- {f} make (the head of a bolt, nail, etc.) flush or level with a surface
- countersink
- An enlargement of the upper part of a hole, forming a cavity or depression for receiving the head of a screw or bolt
المصطلحات ذات الصلة
countersunk
الواصلة
coun·ter·sunkالنطق
Resimler
السابق
المفضلات