(fiil) havşa açmak

التركية - الإنجليزية

تعريف (fiil) havşa açmak في التركية الإنجليزية القاموس.

countersink

to create such a conical recess

The chamfered end of a hole that receives a flat head screw

To cut a tapered recess which allows the head of a screw to lie flush with a surface or The tapered recess itself

To drive a nail or screw below the surface

for the reception of the head of a screw or bolt below the surface, either wholly or in part; as, to countersink a hole for a screw

The larger diameter at the entrance of a machined hole with a conical bottom Similar to a counterbore except for the bottom configuration The general use of a countersink if for use with flat head screws and bolts

a hole (usually in wood) with the top part enlarged so that a screw or bolt will fit into it and lie below the surface

A drill or cutting tool for countersinking holes

a conical recess, typically machined around a hole to admit a screw so that it sits flush with a surface

To chamfer or form a depression around the top of a hole in wood, metal, etc

a bit for enlarging the upper part of a hole

A device to counterbore a hole for the head of a flat head screw

To cause to sink even with or below the surface; as, to countersink a screw or bolt into woodwork

insert (a nail or screw below the surface, as into a countersink)

{f} make (the head of a bolt, nail, etc.) flush or level with a surface

An enlargement of the upper part of a hole, forming a cavity or depression for receiving the head of a screw or bolt

الواصلة

(fi·il) hav·şa aç·mak